Commercial Christmas Light Installation in Red Deer
A lit building reads as open and looked after through the darkest weeks of the year. OutWest designs, installs and removes commercial Christmas lighting for businesses across Red Deer and Central Alberta.
OutWest Property Services installs commercial Christmas lighting for businesses across Red Deer and Central Alberta.
- High rooflines and multi-storey frontage are a large part of the work
- Designed to suit the building, including colour choices
- Removal after the season is part of what we do
- Storefronts and commercial buildings
- Design, install and removal
- Rooflines and entrances
- Free quotes, photos welcome
Request a Free Quote
Serving Red Deer and all of Central Alberta.
Why Businesses in Red Deer Choose OutWest for Commercial Christmas Lighting
We are a local Central Alberta crew based in Red Deer, working on properties across the region through every season.
Design, Install, Remove
We handle the full season, including taking the lighting down afterwards.
Storefronts and Commercial Rooflines
Entrances, rooflines and building frontage.
Local Central Alberta Crew
Based in Red Deer, we work across Central Alberta year round and know the properties and conditions here.
Lighting That Fits Your Building
Commercial frontage is rarely a simple rectangle. Parapets, canopies, signage bands, entrances and multi-tenant divisions all sit at different heights, and lighting that ignores those lines ends up cutting across the building rather than defining it.
We plan the run against the actual frontage, so the roofline, the entrance and the features you want emphasised read clearly from the road and from the parking lot. The result looks intentional rather than improvised, which is the difference between a building that looks open and one that just has lights on it.
What Commercial Installation Includes
It starts with a design mapped to your building, covering the roofline, the entrance and any frontage or signage areas you want lit. Our crew then installs the lighting across those runs, including multi-storey sections, and sets the display up to run reliably through the season. Once the season is over we return, remove the lighting and leave the property clear, so nothing is left on the building going into the new year.
Where We Work From
We work out of Red Deer and cover Central Alberta from there. Blackfalds and Penhold are short runs up and down Highway 2A, Sylvan Lake is about 25 kilometres west on Highway 11, and Lacombe sits 25 kilometres north. The farther towns run on route days: Ponoka up the QEII, Innisfail and Olds to the south, Stettler out east along Highway 12. Booking more than one service, or joining neighbours on the same day, keeps the farther trips efficient for everyone.
Commercial Christmas Lighting for Red Deer Businesses
How We Plan and Install a Commercial Display
Commercial frontage rarely presents as a simple rectangle the way a residential roofline sometimes does. Parapets, canopies over entrances, signage bands and divisions between multi-tenant units all sit at different heights and depths, and a design that ignores those transitions ends up cutting across the building rather than following its actual lines. We start every commercial job with a full frontage walk, mapping the roofline, entrances, canopies and any signage or architectural features the business wants emphasised before any hardware goes up.
We install commercial grade LED strands rated for continuous outdoor use, which matters more on a commercial building than a house given the scale of most runs and the expectation that the display performs reliably every night for the full season without a homeowner nearby to notice and report an outage. Clip selection is matched to whatever the strand is attaching to, whether that is a parapet cap, a fascia band, signage trim or a flat roof edge, since commercial buildings often mix several of these surfaces along a single elevation, and using the wrong clip on any one of them risks either damage to the building material or a strand that comes loose in wind.
Multi-storey sections and flat commercial roof edges bring their own safety considerations, generally requiring more careful staging and harnessing than a typical residential peak, and we do not compress that part of the schedule regardless of project deadlines, since safety on those elevations governs the pace of the work. Once strands are secured, we route and protect connections against moisture, particularly at any point where wiring runs near a roof drain or parapet edge where water tends to pool.
For most commercial installs we set the display on timers and photocells so it activates automatically at dusk and runs on a consistent schedule without needing staff to manage it nightly, which matters for businesses that are not staffed around the clock or that want the display running even on days the location happens to be closed.
Why Commercial Buildings Are a Different Challenge Than Houses
Scale is the most obvious difference. A commercial building might have several times the linear footage of roofline compared with a house, and a strand run that length needs to be planned in segments with clear connection points, both for ease of troubleshooting during the season and for a manageable takedown afterward. Planning those segment breaks up front avoids ending up with one continuous run so long that a single fault anywhere along it takes down the whole display.
Flat commercial roofs also introduce drainage and roof membrane considerations that a typical pitched residential roof does not have. Clips and attachment points need to avoid puncturing roofing membranes, and wiring needs to be routed clear of roof drains so it does not interfere with water flow off the roof during a winter thaw. That is a genuinely different set of considerations than clipping into a shingle edge on a house.
Multi-tenant properties add a coordination layer too, since lighting a strip mall or office building frontage often means working around several different business hours, signage that cannot be obstructed, and sometimes more than one decision maker weighing in on the design for their portion of the building. Planning the frontage as a whole while still respecting those individual sections is part of what separates a coordinated commercial display from a patchwork of unrelated lighting along one building.
11
Communities served
8
Services offered
$69
Memberships start at, per month
Free quotes
No obligation
Scheduling a Commercial Install Around Business Operations
Booking in October or early November gives the best working conditions and the most schedule flexibility, both for us and for the business, since installation can often be arranged around slower operating hours rather than needing to work overnight or before opening. Waiting until closer to December compresses that flexibility considerably, both because winter conditions make roofline and parapet work slower and because commercial installation slots fill up as more businesses look to have their displays ready before the holiday season is underway.
Cold weather install limits apply to commercial buildings the same way they do to houses, since very cold conditions make roofing and trim materials more brittle and increase the risk of a clip cracking material that would have taken it fine in milder weather. Scheduling before the season's harder freezes set in avoids running into that limit while the install is still in progress.
At the end of the season we handle full removal, generally scheduled for the weeks after the new year once the display is no longer needed, working again around the business's operating hours where possible so removal does not interfere with regular activity at the property. Booking installation and removal together at the outset means the business does not need a second round of coordination once the season wraps up.
The most common issue on commercial buildings that skip a proper design phase is lighting that follows the shortest path across the frontage rather than the actual architecture, which flattens features like canopies and signage bands instead of highlighting them.
OutWest Property Services
What Businesses Get Wrong Without a Planned Design
The most common issue on commercial buildings that skip a proper design phase is lighting that follows the shortest path across the frontage rather than the actual architecture, which flattens features like canopies and signage bands instead of highlighting them. A building with genuinely interesting frontage details can end up looking generic if the lighting run ignores those details in favour of the fastest install.
Using residential grade lighting at commercial scale is another frequent gap, since the extended run lengths and nightly usage hours on a commercial display put more strain on hardware than a typical house display sees, and lighting not rated for that scale tends to develop failures partway through the season.
Skipping timers and photocells and relying on staff to manually switch the display on and off is a third common issue, since it is easy for that responsibility to fall through the cracks on a night with unusual staffing, leaving the building dark during exactly the hours the display was meant to be seen. Automating that with a photocell removes the dependency on someone remembering each evening.
What Happens After Installation and at End of Season
Once a commercial install is finished, we test the full run segment by segment, confirm timers and photocells are set correctly for the property's needs, and walk the frontage from the parking lot and street to confirm the display reads clearly from the vantage points customers and passersby will actually see it from. Any offcuts, packaging or spare hardware get cleared from the site before we leave.
Through the season, the segmented design means a fault in one section can be diagnosed and addressed without needing to inspect the entire run, which keeps any mid-season service call efficient rather than open ended. We keep records of the specific layout and clip points used, which speeds up both troubleshooting and next year's reinstall if the business wants the same design again.
At removal, every strand, clip and length of wiring comes off the building, roof drains and membrane areas are checked to confirm nothing was left that could interfere with winter drainage, and the property is left clear for the new year. Businesses that want the same or an updated design the following season have that layout on file, which makes planning the next installation more straightforward from the very first conversation.
What Affects the Cost of Commercial Christmas Lighting in Red Deer
Every property is different, so we quote each one on its own. These are the things we look at when we put your quote together.
Property size and number of storeys
Access, layout, and safe working conditions
Current condition of the surface or area
Scope of work and any optional add-ons
Tell us about your property and we will put together a free quote, no obligation.
The OutWest Commercial Christmas Lighting Process
From your first message to a lit building, here is how it goes.
Step 01
Request Your Free Quote
Send us your address, the service you want, a preferred date, and photos of the property if you have them.
Step 02
We Confirm the Details
We review what you need and confirm the scope and a date that works for you.
Step 03
We Install Your Lighting
Our crew installs the lighting along your roofline and entrances, and we come back to remove it at the end of the season.
Step 04
Keep It Clear
Ask about our Exterior Care Membership if you want it kept up through the seasons.
Step 01
Request Your Free Quote
Send us your address, the service you want, a preferred date, and photos of the property if you have them.
Step 02
We Confirm the Details
We review what you need and confirm the scope and a date that works for you.
Step 03
We Install Your Lighting
Our crew installs the lighting along your roofline and entrances, and we come back to remove it at the end of the season.
Step 04
Keep It Clear
Ask about our Exterior Care Membership if you want it kept up through the seasons.
What Central Alberta Customers Say
I couldn't be happier with the service from OutWest Property Services! They soft washed my house and cleaned all of my windows, and the difference is incredible. The siding looks brand new, and the windows are crystal clear inside and out. They were professional, punctual, paid attention to every detail, and left everything spotless. It's obvious they take pride in their work. I highly recommend OutWest Property Services to anyone looking for high-quality exterior care. I'll definitely be using them again!
Evan Smart
Equipment and standards
We use commercial water-fed pole and pure-water (deionized) systems for glass and high work, and low-pressure soft-wash equipment for siding, wood and other delicate surfaces, matching the method to the material rather than forcing pressure on everything. Surfaces we work on across Central Alberta include vinyl and painted siding, cedar and composite decking, concrete and paver driveways, and eavestrough and soffit. For local rules on water use, drainage and exterior work, your municipality is the authority.
Frequently Asked Questions About Commercial Christmas Lighting
Do you remove the lighting after the season in Red Deer?
Can you light a multi-storey building in Red Deer?
Can you match our branding or colours on a Central Alberta storefront?
Do you also do residential Christmas lights in Red Deer?
What areas around Red Deer do you serve?
How do I get a quote in Red Deer?
Last updated: August 8, 2026
Proudly Serving Red Deer and Central Alberta
OutWest Property Services is based in Red Deer and works across Central Alberta, including Blackfalds, Lacombe, Sylvan Lake, Penhold and Innisfail.
From window and gutter cleaning to pressure washing and Christmas light installation, our crews bring the professional equipment and care your home deserves.
Ready to Light Up Your Storefront?
Free quotes, no obligation. Tell us about your property and we will get you a price.