Christmas Light Installation in Red Deer
Getting lights up a two-story roofline in November is nobody's favourite job. OutWest designs, installs and takes down Christmas lighting across Red Deer and Central Alberta, including custom setups for new builds.
OutWest Property Services designs, installs and takes down Christmas light displays across Red Deer and Central Alberta.
- High rooflines and peaks are a large part of the work
- Custom setups designed for new builds
- Takedown at the end of the season is part of what we do
- Design, install and takedown
- Custom setups for new builds
- Rooflines and peaks
- Free quotes, photos welcome
Request a Free Quote
Serving Red Deer and all of Central Alberta.
Why Homeowners in Red Deer Choose OutWest for Christmas Lighting
We are a local Central Alberta crew based in Red Deer, working on homes across the region through every season.
Design, Install, Take Down
We handle the whole season, including coming back to take the lights down.
Two-Story Rooflines
The high runs and peaks that are awkward and cold to reach yourself.
Local Central Alberta Crew
Based in Red Deer, we work across Central Alberta year round and know the conditions here.
A Design That Fits Your Roofline
No two houses present the same roofline. Peaks sit at different pitches, dormers break up the run, gable ends step in and out, and a garage wing can sit well forward of the main face of the house. All of that changes where a line of lighting should start and stop.
A design that follows the architecture reads cleanly from the street, because the eye picks up the shape of the building rather than a stripe across it. Lights strung in one straight line ignore the peaks entirely and end up looking flat, which is why we plan the run against the actual roofline before anything goes up.
The same crew books your Christmas light removal in the new year, so nothing is left hanging off the eave through spring, and we handle commercial Christmas lighting for storefronts and multi-tenant buildings on the same schedule.
We also install in nearby towns: holiday light installers in Sylvan Lake, Lacombe Christmas light installation and Christmas lighting for Blackfalds homes.
What Christmas Light Installation Includes
It starts with a design mapped to your roofline, so the runs, peaks and any feature areas are planned before installation day. From there our crew installs the lighting along the rooflines and up the peaks, including the high sections on a two-story build, and sets everything up so it runs through the season. At the end of the season we come back, take the lighting down and clear the site, so the takedown is not left sitting on your list in January.
What we have learned doing this here
The short install window here is the whole game. We put displays up through October and early November, before the deep cold and the first heavy snow make roof and ladder work slow and unsafe, and we take them down cleanly in the new year. Doing it early also means the clips and lines are set before anything freezes to the roof, which is what keeps a display from sagging halfway through December.
Where We Work From
We work out of Red Deer and cover Central Alberta from there. Blackfalds and Penhold are short runs up and down Highway 2A, Sylvan Lake is about 25 kilometres west on Highway 11, and Lacombe sits 25 kilometres north. The farther towns run on route days: Ponoka up the QEII, Innisfail and Olds to the south, Stettler out east along Highway 12. Booking more than one service, or joining neighbours on the same day, keeps the farther trips efficient for everyone.
How Christmas Light Installation Actually Comes Together
From Design to Lit Roofline: Our Process
Every installation starts with mapping the roofline against the actual structure of the house rather than assuming a single straight run will look right. Peaks, dormers, gable ends and any section of the house that sits forward or back from the main face all change where a line should start, stop or step up to follow the roof pitch. We walk the property and note those transition points before any lights come out of the truck, since a plan made on paper without seeing the actual roof leads to gaps and awkward jumps once installation starts.
We use commercial grade LED strands built for continuous outdoor exposure through an Alberta winter, which matters because consumer grade string lights are not rated for the repeated cold and thaw cycling this climate puts them through and tend to fail partway through the season. Clip selection depends entirely on what the strands are being attached to: shingle clips hook under the tab of a shingle without puncturing the roofing material, while gutter and fascia clips grip the lip of the eavestrough or trim board without denting soft aluminum. Using the wrong clip type for the surface either damages the roofing or lets the strand sag and pull loose in wind, which is why we match clip hardware to each specific section of the run rather than using one clip everywhere.
Roofline safety governs the pace of the install more than anything else. Working a steep pitch or a two-story peak means proper harnessing and careful footing, and we do not rush that part of the job regardless of how the weather is trending. Once a run is clipped in, we route wiring to keep connections protected from moisture and snow load, and we test every strand and connection point before considering that section finished, since finding a dead segment after the crew has left costs everyone more time than checking it on the roof.
For displays that include ground level or landscape lighting, we add photocells and timers so the display comes on automatically at dusk and shuts off on a set schedule, which means the homeowner is not manually flipping a switch every evening through the entire season, and the display runs consistently even if nobody is home to manage it.
Why Rooflines Here Are Harder to Light Than They Look
A lot of Red Deer homes built in the last fifteen to twenty years have more complex rooflines than older housing stock, with multiple gables, varied pitches and garage wings that sit at a different depth than the main house. That architectural variety looks great from the street but makes a single straight strand of lights look genuinely wrong, since it ignores every peak and step the roof actually has. Designing around the real shape of the roof, rather than the shortest path from one end to the other, is what makes the finished display read as intentional.
Winter installation conditions add a separate layer of difficulty. Once temperatures drop into a hard freeze, shingles become more brittle and clips that would seat cleanly in warmer weather risk cracking a shingle tab if forced on too cold. We track cold weather install limits closely and schedule installs before temperatures drop into that risk range wherever possible, which is part of why booking early in the season, rather than waiting until the first snow, gives us the best working conditions to do the job properly.
Wind is the other factor that is easy to underestimate. Central Alberta gets sustained wind events through fall and winter that a poorly secured strand simply cannot survive, which is why proper clip selection and secure attachment at every point along a run matters more here than it might in a calmer climate. A strand that is only loosely draped rather than clipped at regular intervals will work itself loose over a season of wind, which is a common issue with light strands that were hung quickly rather than properly secured section by section.
11
Communities served
8
Services offered
$69
Memberships start at, per month
Free quotes
No obligation
Timing an Installation Around the Season
Booking in October or early November gives the best working conditions, since temperatures are still generally manageable for careful roofline work and there is no snow load on the roof to navigate around while installing. Waiting until closer to Remembrance Day or into December means working around whatever snow has already accumulated, which slows the install and increases the safety considerations around footing on a pitched roof.
Once temperatures settle into a consistent hard freeze, we do have cold weather install limits that affect scheduling, since very cold shingles become brittle and certain clip types are more likely to crack a tab if installed in extreme cold rather than moderate conditions. Booking early avoids running into that limit altogether and gives more flexibility around scheduling generally, since demand for installation slots climbs steadily as the season gets closer to December.
At the end of the season we return for takedown, generally once the display is no longer being used and before winter conditions make roofline work harder rather than easier, which is typically in the weeks after the new year rather than waiting until spring thaw. Booking both installation and takedown together at the start of the season means the whole cycle, from lighting up the house to a clear roofline again in January, is handled without the homeowner needing to arrange a second call later.
The most common issue with DIY installations is using household extension cords and consumer light strands that are not rated for continuous outdoor winter exposure, which tend to develop dead sections partway through the season as connections degrade in the cold.
OutWest Property Services
Mistakes That Cause Problems Mid-Season
The most common issue with DIY installations is using household extension cords and consumer light strands that are not rated for continuous outdoor winter exposure, which tend to develop dead sections partway through the season as connections degrade in the cold. Commercial grade strands rated for this kind of continuous outdoor use hold up through the full season far more reliably.
Using the wrong clip for the surface is another frequent issue, since gutter clips forced onto a shingle edge, or shingle clips pinched onto an eavestrough lip, either fail to hold securely or damage the material they are attached to. Matching hardware to the specific surface at each point of the run avoids both problems.
Waiting until the first snowfall to book an installation is a scheduling mistake more than a technical one, since it pushes the work into worse conditions and a busier calendar, both of which make it harder to get the careful, unhurried installation that a good looking display actually needs. Booking early in the fall avoids that entirely.
What Happens After Installation, and at Takedown
Once installation is complete, we test every strand and connection along the full run, confirm any timers and photocells are set correctly for dusk to a set evening cutoff, and walk the property from the street to confirm the display reads the way it was designed to before considering the job finished. Any packaging, offcuts or spare hardware from the install gets cleared from the property rather than left in a pile by the garage.
Through the season, if a section develops an issue, the strands and connections are accessible enough that a follow up visit can address it without needing to redo the entire run. We keep notes on how the specific roofline was mapped and clipped, which speeds up both mid-season troubleshooting and the following year's install if the same design is being reused.
At takedown, we remove all lighting, clips and any wiring installed for the season, and do a final check along the roofline to confirm nothing was left behind that could interfere with the roof or eavestrough over the rest of the winter. The property is left clear going into the new year, and for customers who want the same design again next season, we retain the layout notes so re-installation the following fall can move quickly.
What Affects the Cost of Christmas Light Installation in Red Deer
Every property is different, so we quote each one on its own. These are the things we look at when we put your quote together.
Property size and number of storeys
Access, layout, and safe working conditions
Current condition of the surface or area
Scope of work and any optional add-ons
Tell us about your property and we will put together a free quote, no obligation.
The OutWest Christmas Lighting Process
From your first message to a lit roofline, here is how it goes.
Step 01
Request Your Free Quote
Send us your address, the service you want, a preferred date, and photos of the property if you have them.
Step 02
We Confirm the Details
We review what you need and confirm the scope and a date that works for you.
Step 03
We Install Your Lights
Our crew installs the lights along your roofline and peaks, and we come back to take them down at the end of the season.
Step 04
Keep It Clear
Ask about our Exterior Care Membership if you want it kept up through the seasons.
Step 01
Request Your Free Quote
Send us your address, the service you want, a preferred date, and photos of the property if you have them.
Step 02
We Confirm the Details
We review what you need and confirm the scope and a date that works for you.
Step 03
We Install Your Lights
Our crew installs the lights along your roofline and peaks, and we come back to take them down at the end of the season.
Step 04
Keep It Clear
Ask about our Exterior Care Membership if you want it kept up through the seasons.
What Central Alberta Homeowners Say
I couldn't be happier with the service from OutWest Property Services! They soft washed my house and cleaned all of my windows, and the difference is incredible. The siding looks brand new, and the windows are crystal clear inside and out. They were professional, punctual, paid attention to every detail, and left everything spotless. It's obvious they take pride in their work. I highly recommend OutWest Property Services to anyone looking for high-quality exterior care. I'll definitely be using them again!
Evan Smart
Equipment and standards
We use commercial water-fed pole and pure-water (deionized) systems for glass and high work, and low-pressure soft-wash equipment for siding, wood and other delicate surfaces, matching the method to the material rather than forcing pressure on everything. Surfaces we work on across Central Alberta include vinyl and painted siding, cedar and composite decking, concrete and paver driveways, and eavestrough and soffit. For local rules on water use, drainage and exterior work, your municipality is the authority.
Frequently Asked Questions About Christmas Light Installation
Do you take the lights down in Red Deer at the end of the season?
Can you do a two-story roofline in Red Deer?
Can you design something custom for a new build in Central Alberta?
Do you install Christmas lighting for businesses in Red Deer?
Do you install Christmas lights outside Red Deer?
Do you install Christmas lights in Blackfalds?
What areas around Red Deer do you serve?
How do I get a quote in Red Deer?
Last updated: August 8, 2026
Proudly Serving Red Deer and Central Alberta
OutWest Property Services is based in Red Deer and works across Central Alberta, including Blackfalds, Lacombe, Sylvan Lake, Penhold and Innisfail.
From window and gutter cleaning to pressure washing and Christmas light installation, our crews bring the professional equipment and care your home deserves.
Ready to Light Up Your Roofline?
Free quotes, no obligation. Tell us about your property and we will get you a price.